BMR Redesigns Lowering Springs for 4th Gen F-Body (SP001)
04-14-2009 | 12:06 PM
#1
BMR Redesigns Lowering Springs for 4th Gen F-Body (SP001) BMR Fabrication Redesigns Lowering Springs for the 4th Generation F-Body
Improve the handling and cosmetic appeal of your 4th Gen without sacrificing ride quality with a set of redesigned Lowering Springs from BMR Fabrication. The front springs lower the vehicle by 1.25” and have a spring rate of 550 pounds per inch. The rear springs lower the vehicle by 1.25” and have a spring rate of 160 pounds per inch. Both springs are constructed from high tensile silicone chromium spring wire. A set of BMR Lowering Springs (SP001) will lower the center of gravity and dramatically increase the cornering capabilities of your F-Body. Front springs (SP002) and rear springs (SP003) also sold separately. Available in a red powdercoat finish.
As you can see from the image, the front spring is a linear design. The rear spring is a dual rate design.
The front springs weigh less than 16 pounds per pair. The rear springs weigh less than 12 pounds per pair.
SP001 - $249.95 Set of 4
SP002 - $129.95 Front
SP003 - $129.95 Rear
IN STOCK AND READY TO SHIP!!!
CALL BEFORE 4PM EST FOR SAME DAY SHIPPING
To preview all of BMR’s high-performance suspension parts, please visit www.bmrfabrication.com, email sales@bmrfabrication.com, or contact them at BMR Fabrication, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.
