4l60 60's
Thread Starter
11 Second Club
iTrader: (9)
Joined: Mar 2007
Posts: 1,016
Likes: 0
From: Avondale, AZ
yea i know its the stall, worst thing is if i change the stall there goes traction on the street. Its fun spraying from a dig on the street and dead hooking
Whoa! back up the converter wagon. I have launched my ws6 at 3830#'s with a 3000 vig converter and 3.23 gear with bolt-ons and cut a 1.67 60ft on motor and 1.58 on 150 shot. Put the heads and cam on and it cuts a 1.56 on motor and 1.46 on spray. All on stock suspension only has tubular lca's. Is your car lowered or anything? Is anything altering your suspension in any way?
My converter just went bad and I put another one in of the same size. The old one my 60ft dropped to 1.76 on motor and I didn't even try the spray. I lost 3-4 mph in the quarter also.
My converter just went bad and I put another one in of the same size. The old one my 60ft dropped to 1.76 on motor and I didn't even try the spray. I lost 3-4 mph in the quarter also.
Not really, i think you just need to heat up those drags radials really good. my 4000, more like 4200, can hook pretty damn well on my bolt on car with BFG drags on a warm street. Im sure some Mickey's and a 100 shot would do the same. Step up to the plate homes.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
11 Second Club
iTrader: (9)
Joined: Mar 2007
Posts: 1,016
Likes: 0
From: Avondale, AZ
Whoa! back up the converter wagon. I have launched my ws6 at 3830#'s with a 3000 vig converter and 3.23 gear with bolt-ons and cut a 1.67 60ft on motor and 1.58 on 150 shot. Put the heads and cam on and it cuts a 1.56 on motor and 1.46 on spray. All on stock suspension only has tubular lca's. Is your car lowered or anything? Is anything altering your suspension in any way?
My converter just went bad and I put another one in of the same size. The old one my 60ft dropped to 1.76 on motor and I didn't even try the spray. I lost 3-4 mph in the quarter also.
My converter just went bad and I put another one in of the same size. The old one my 60ft dropped to 1.76 on motor and I didn't even try the spray. I lost 3-4 mph in the quarter also.