BIGB4015

I am currently running a 244/242 cam w/ bolt-ons and am about to spray 150 on it. The cam is a bit much for the 4000+ gto. Im thinking about swapping Im looking for the quickest cam+spray combo possible. The car is a m6 with 3.46 gears Im Looking for something that will runn low 11s on the spray if possible a high 10. I was thinking like a high 220 low 230s not sure about lsa either. Help appreicated.

ShiznityZ28

iTrader: (11)

You need a lot more exhaust duration for a good nitrous cam. I like 6 degrees just for motor stuff add another 4 for a light nitrous app. Id go something like 228 240 on a 112 +2 .

BIGB4015

anyone else?

alharbi

will that be for a stock bottom with a stock piston clearance ?
coz if you have enough pistons clearance , i would suggest somthing like 244/248 .613/.632 @.114

RyanM02

iTrader: (1)

503tq? What you have the donkey dick cam?

BIGB4015

Stock bottom end.

alharbi

503 is the tq for my 402cid
and it's a MTI R1 camshaft in it
not the donkey dick one

alharbi

dude
why don't you contact Ron or Mike at vengeance racing
i belive they really can put you exactly where you want
i had few deals with them b4 and they really cool guys and you can trust them as i did

they camed my ..
1- camaro forged ls1 346 cid with 225cc dart heads ---> 432hp 397tq / 584hp 563tq on the bottle 150hp shot
2- trans am stroker ls2 402 cid with 225cc dart heads "SOLD" ---> 529hp 538tq / 681hp 701tq on the bottle 150 shot (those results after replacing MTI R1 camshaft with vengeance custom cam , old results in my signature)
3- trans am stroker ls3 427 cid with 235cc TFS heads ---> non installed yet and waiting for results
4- c6 ls2 with stock bottom and 225cc TFS ---> non installed yet and waiting for results , wish me the best of luck