who the hell makes this kit??????????
Thread Starter
TECH Veteran
iTrader: (246)
Joined: Mar 2008
Posts: 4,984
Likes: 1
From: Chicago/Crown point
who the hell makes this kit?????????? i cant find it anywhere and nobody really seems to know....the nozzle says THE HAWK..
as for the noids they are all black and small at that....they dont say anything on there at all and no stamps or markings of any kind.....
as for the noids they are all black and small at that....they dont say anything on there at all and no stamps or markings of any kind.....
I believe its a old nozzle from a TOP GUN kit. I used to have one myself. I still have the noids but not the nozzle. It was the same color red too. Try google top gun nitrous. I believe they were the old NX.
Trending Topics
Thread Starter
TECH Veteran
iTrader: (246)
Joined: Mar 2008
Posts: 4,984
Likes: 1
From: Chicago/Crown point
well i did a google search and they dont even have a website....as for the noids they are just small and black believe me i thought nx myself but have no clue....
is there a sponser maybe that would know this for certain please chime in anytime
is there a sponser maybe that would know this for certain please chime in anytime
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad GallardoGuest
Posts: n/a
As far as the nozzle goes sure. And the noids, I dont see why not. Just test them to see if they work. I just stopped using mine about 3months ago and that was because the nitrous noid stopped working for me after about 7 years with out even a rebuild. I dont know what noids you have but mine were pretty big, like the big NOS noids.
Well I had the same problem buddy. You can do what I did and just buy a regular NOS brand nozzle and buy the NOS jets for it too. I just based mine off of what other companys were jetting there similar setups for and went with that. It worked out really well too and had no issues on the dyno. Sounds kinda half ***, but it worked and right now the setup Iam using has NOS nozzles/Jets and the big ZEX noids and works like a charm.
