Very nice, how much more HP are you looking to run, compared to the two stage? 
Quest for 9s w/ the help from NITROUS OUTLET
Thread Starter
9 Second Club
iTrader: (34)
Joined: Mar 2005
Posts: 2,248
Likes: 0
From: SPRINGFIELD MISSOURI
Quest for 9s w/ the help from NITROUS OUTLET I just finish up my engine build over the winter and wanted to upgrade my nitrous so I called NITROUS OUTLET and talked to Dave on several occassion trying to decied on what I wanted to do for a nitrous set up. I was debating over the plate kit or Direct port. So went DIRECT PORT 
So I sold my old 2 stage set up and I sent my FAST ported 90 intake to NITROUS OUTLET and here is what came back from dave and delivered by UPS lol
thanks again DAVE Awesome work.
I will post up a the install this week and will have vids soon.
Im going to be running two 15lb bottles ran together to feed the angry DP KIT.
So I sold my old 2 stage set up and I sent my FAST ported 90 intake to NITROUS OUTLET and here is what came back from dave and delivered by UPS lol
thanks again DAVE Awesome work.
I will post up a the install this week and will have vids soon.
Im going to be running two 15lb bottles ran together to feed the angry DP KIT.
Last edited by dnkynrbk; Apr 11, 2009 at 09:14 PM.
Trending Topics
Thread Starter
9 Second Club
iTrader: (34)
Joined: Mar 2005
Posts: 2,248
Likes: 0
From: SPRINGFIELD MISSOURI
The two stage worked very well was just wanting to do a bigger shot then a 200shot and didnt want to lean out the back cyl. Im hoping with my 370 over the winter my plan was to build it on the basis of running a 300 shot on it. Heads have been reworked pistons are gapped for a 300 shot.
So I had cam motion spec a cam, Marty @chance conv.,build the stall and Performabuilt build the tranny. So Im hoping with this combo matched it will provide good qtr. mile times And of course Dave to top it off with the Direct port.
I should have the tune done this week and taking it to the track this sat just in time for KING OF THE STREETS here in missouri.
So I had cam motion spec a cam, Marty @chance conv.,build the stall and Performabuilt build the tranny. So Im hoping with this combo matched it will provide good qtr. mile times And of course Dave to top it off with the Direct port.
I should have the tune done this week and taking it to the track this sat just in time for KING OF THE STREETS here in missouri.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
9 Second Club
iTrader: (34)
Joined: Mar 2005
Posts: 2,248
Likes: 0
From: SPRINGFIELD MISSOURI
well was going to the Track this sat but rain canceled that out. So maybe next week here is the pics of the intall I still have to hide some of the wiring but still looks good.
That looks nice. I remember seeing your kit in the for sale section for a long time. Congrats on finally selling. The new setup looks like it should be able to easily meet your goals.