I am running in SD mode, so I don't have a MAF and I have a 4" cone filter attached to the throttle body.
I would like to install the nozzle in the end of the cone filter, but have concerns about how it will work since the nozzles are designed to spay a 90 degree pattern which would make it spray right into the filter material.

Would this work like this or should I find a nozzle that will spray straight out the tip?

 

Here is a picture of what I am trying to explain:

 

id put it in the throttle body,i have an sd tune also i got a coated hard plastic straight pipe about 6 inches long with rubber couplers on each end,i installed nozzle in the pipe and face towards throttle body works great,good luck.

 

The best fit would be one of our plates. If that is not in your budget and you want to stick with a nozzle one of the NX STD nozzles would work. Its a stainless nozzle that blows strait out of the tip.
Dave

 

Do you carry the NX STD nozzle, if so, how much?

Thanks

 

Yes sir. Here is a link. We need to update the picture. They are now stainless and silver.
http://www.nitrousoutlet.com/catalog...product_id=949