just bought a nitrous kit and wondering if its hard to wire with a full throttle switch and button. never installed a kit in my life. dont know what kind of plugs to use or what jets=what shot. need some help please

 

Lt or Ls1??

the kits are very easy to install and detailed instructions will be with the kit if you bought it brand new!

What kit??
How much you plan to spray?

 

lets start with, what kit did you get?

 

its just a lt1 with a few bolt ons and a built rear end with 4.10 gears. wanna spray a 100shot at most. dont wanna blow the motor yet. its a NOS kit i bought from a friend but it has a NX 10lb bottle. solenoids and everything else is NOS. wet shot on a full throttle switch, but was told by alot of my friends to run it on that and a button for safety

 

M6 or A4?You're probably going to want a window switch. If you still want to do WOT and a button, just do them in line with eachother. Assuming this kit came with relay and all that. The stickies for wiring in this section are you friend.

 

3 words for you Safety,Safety,Safety. Get ALL the safety stuff avaiable.
dont take any chances.

 

maybe they mean an arming switch for the "button"? read the stickies though!! they are very informative

this is a good link too

http://www.go-fast.org/z28/new_to_nitrous.html