I had a ms3 in the 04 gto it ran 10.53's with good heads and a 150 shot and a 3400 stall but this is a very heavy car compared to the f-bods. I can't remember the tire numbers on the 150 but it was just over 600rwhp and 150rwtq.

 

wasnt knocking the car man... was just saying 3360 is close to what a camaro weighs stock.. so a full weight car running those times REALLY impresses me..
no need to be that way..

 

just a little sarcasm. I'm happy with what my cars does and don't care what anyone thinks.

just want to put it out there that is not as easy as some may think.

"im gonna put a ms3 and some heads and 150 shot on my car and go lows 10's" haha, if only it happened like that.

 

Thats right you forgot about the tires

 

oooopss, yea add those babies to the mix too.

 

I hate all you ******* at sea level lol. I need to restall my vig and I should get I hope 11.50's. This run was with a two second 60 footer.
http://www.youtube.com/watch?v=uo5GG2VMNzU

 

ms3, th400, and 150 zex shot on street tires..... 11.6 @ 124 w/ a 1.9 60ft. Has alot more in it, I had to get in and out of it all through first and part of second.....

 

Highlighted the problem for ya

 

Went 10.14 with a forged 370 full race weight car with a 4l60e

 

vid with the ms3

TIME SLIP

 

ALso nip the plug on that pass so lost power on the top end went a little lean.

 

haha, i know what it takes man... all you gotta do is "slap" a turbo on, or "toss" a cam in it.. DUH!

i think it runs very good man, you have done right with it!

nah, no need in those.. street tires hook 500+rwhp just fine...

 

WOW you ran a 15.43 @85mph with MS3 and N20 damn maybe I shoulda went with a turbo or something LOL J/K sick runs

 

My cams a tad smaller than the ms3 on the intake side but I have ran 10.72@128 with a shitty 1.55 60" with a 125rwhp shot in 3600 da in my cam only, 3600 converter, stock geared on a 255 mt radial Z28.

 

LOL, ya i know. I still thought it was impressive for street tires.... not to mention only a 3600 stall

 

so just askin i have the prc 2.5 5.3 heads with the ms3 cam and stock internals, what all should i do to make a good nitrious set up/........ FYI i know nothing about nitrious

 

I have been spraying my 346 with stock 241 heads and MS3 for 2 1/2 years. I have been all the way up to a 250hp shot but the tranny didn't like it. I usually spray a 200hp shot. I have a wiring problem this year that is keeping me from running a good time but it did trap 133mph at Pinks all Out on a 200 shot. The MS3 loves the spray.

 

full body weight of trans am 00 model dont exactly know full weight. ls6 intake ported and polished,tb2.5 5.3 heads, ms3, 9 inch 350 gear and spool full suspension under the ***. vig 3200 a4 built by me. On 2 systems 100 dry and 200 wet (tnt) being on both of them within 5 ft of tree car went a 6.27 1/8 and a 9.93 at 140 mph and 60 ft was a 1.32. Car has 28 degrees of timing and im proud of those time. i mean 300 worth of gas its gotta go somewhere lol! ill post a vid shortly