Set up question? Class rules setup
07-22-2009, 01:42 PM
#21
Alot more than a 7531 I think.
http://cgi.ebay.com/ebaymotors/FAST-...Q5fAccessories
$2000 just for the box.
http://cgi.ebay.com/ebaymotors/FAST-...Q5fAccessories
$2000 just for the box.
07-22-2009, 02:30 PM
#23
Get a good Plate like a wilson. then get an aluminum spacer and have the 80 mm tb adapted to it. If you can control timming you can make a progressor by just pulling 10 extra degrees on say a 300 hit then ramping it back in. the nitrous will be there but without the timming to burn it. it will reduce power. hewll the carb guys prolly will be running THE MSD traction control boxes. LOL Ride the dots!
Making a progressor via timing with the stock comp. will take a lot of work to get right, but im sure we can figure it out to make it work pretty decently.
if I can make it go 9.0's-9.20's consistently Ill be happy. Ill just saw the old guys off on the tree.
07-22-2009, 04:19 PM
#27
TECH Enthusiast
iTrader: (52)
Join Date: Jun 2007
Location: Summersville, WV
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
You running that box atv???? Still a lot cheaper than a Davis system. You need to bring your car down here and race our local king of the streets 1/8th mile class next weekend. I think you would be competitive plus it pays out pretty good
08-13-2009, 10:26 PM
#30
Hey Cam, here's that setup I was talking about courtesy of bigboy576103
http://www.lsxvideo.com/view_video.p...fb6a08af0923de
Look at :43
http://www.lsxvideo.com/view_video.p...fb6a08af0923de
Look at :43
I talked to the pops and another good friend/fabricator of ours and we are confident we can make something to do this type of set up if we go that direction.
They just started a 26x8.5 tire 1/8 mile class that we may try with the stock short block and some worked heads and go 5.90's-6.10's, in our minds atleast. haha
