question about nitrous parts,,,
Thread Starter
Joined: Apr 2008
Posts: 1,616
Likes: 4
From: Fort Worth Texas
question about nitrous parts,,, Hello lookin for some advice, I currently have a zex wet nozzle kit on my car, and have been spraying a 120 shot. Here is my question I am going to up the shot to 200 with my new H/C setup. does anyone know if this zex solenoid unit box, thing is capable of this, it has the TPS wire activated magic box. I have a nos fuel and n20 solenoid with jets that is set up for a 250 shot I used on my 69 with a plate system. Would it be safe to use the solenoids and jet down , and instead of using the plate type setup just plumb them into my nozzle? it looks like alot of the wet systems being sold are just that, the n2o and fuel solenoid with the jets and and a nozzle. Thanks
also is the nozzle setup I have (in the inlet tube before the throttle body) ok to use with a 200 wet shot. Or do I have to have one of those plates that bolts on and still has a nozzle mounted in it? I appreciate any help or advice on this. Thanks
also is the nozzle setup I have (in the inlet tube before the throttle body) ok to use with a 200 wet shot. Or do I have to have one of those plates that bolts on and still has a nozzle mounted in it? I appreciate any help or advice on this. Thanks
Man I would go with a plate kit from one of the sponsors on here. And sell your kit and just buy one for your car a 200 shot not tunned right or the wrong plugs with go boom fast. Just my 2 cents worth. I would do it right if you are going to do there is no sense and trying to save a few $ when in the long run its going to cost you more. Good luck.
