i run in the 1180s n/a. what kinda shot would it take for me to hit 10s?

its an a4 car, high 1.7 60 foots. ptc 3600 stall 3.23 gears. revving to 6500. does anyone see any problems with going with a 125 shot

 

all you need is a 100 hit!

 

That or maybe a tad more. Depends on where you have the juice come on at, off at, traction, etc.

 

i figure id keep the juice off till 2nd gear. second gear with my setup lasts a long time. im just shiftin into third when i cross the stripe

 

I bet it would go ~10.7-10.8 on a 125 WHEEL shot which would be like a 150 flywheel

 

Try a widow switch and just set it up to come on at 4k. You really should spray part of first gear to help your times. With your gearing you'll probably be out 1 to 2 car lenghts before it would come on. Oh, and you will be using a little more of third gear with the juice.

 

alright so i want a kit that ranges me from 75 to 125, or maybe even 150. if so what kit should it be, cheap is better, thanks

 

A basic heads cam car will usually have a .7 ET reduction from a 100 shot. It all depends on your convertor. I'd hit it with 150 to make sure you get there. My car picks up like 1.3 sec. on a 100 shot LOL

 

^ i agree with jmill id do 150 hit for sure and never look back.

 

ne more? what about my convertor? does it have to have anti balloon plates?