Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

M6 guys, who are spraying!!

Old Aug 18, 2009 | 07:31 AM
  #1  
racejunky02's Avatar
Thread Starter
10 Second Club
10 Year Member
iTrader: (41)
 
Joined: Mar 2007
Posts: 93
Likes: 0
From: Warfordsburg, Pa
Default M6 guys, who are spraying!!

Trying to do some homework on nitrous and what I can expect, please help..
Tire size?
N/A times vs Spray times?
60ft?
How much spray?
Wet or Dry?
Are you spraying off the line?
What gears you have in the rear?
Reply
Old Aug 18, 2009 | 11:11 PM
  #2  
Soul Crusher's Avatar
Launching!
 
Joined: Sep 2007
Posts: 230
Likes: 0
From: Surrey, BC
Default

Stock tires that suck
12.9@118 with infinite wheelspin / 13.4@107 N/A
2.4ish on spray / 2.2 N/A
100 shot
wet
yes
stock 3.42
Reply
Old Aug 18, 2009 | 11:20 PM
  #3  
killaxtranz's Avatar
Staging Lane
iTrader: (3)
 
Joined: Aug 2008
Posts: 96
Likes: 0
Default

nitto 555r 315's
havnt ran it at the track yet
broken rear end cuz spraying off line on street lol
175 shot
wet
stock 3.42

make sure if u gotta lot of tire u dont spray off line or u minus well just video tape it and let us all watch u blow it. and also stock clutchs hate nitrous upgrade to monster or spec
Reply
Old Aug 18, 2009 | 11:20 PM
  #4  
ls2 bait's Avatar
9 Second Club
iTrader: (11)
 
Joined: May 2005
Posts: 4,507
Likes: 5
From: in your closet
Default

Trying to do some homework on nitrous and what I can expect, please help..

Tire size? 28x10.5-15 et drag

N/A times vs Spray times? 10.78@128 vs 9.91@141 (thus far. only 2 attempts)

60ft? 1.57 motor, 1.44 n2o

How much spray? 200 shot

Wet or Dry? wet

Are you spraying off the line? about 5-10 ft out

What gears you have in the rear? 4.10. about to switch to a 3.73
Reply
Old Aug 19, 2009 | 08:02 AM
  #5  
racejunky02's Avatar
Thread Starter
10 Second Club
10 Year Member
iTrader: (41)
 
Joined: Mar 2007
Posts: 93
Likes: 0
From: Warfordsburg, Pa
Default

Thanks guys, this helps..
Reply
Old Aug 19, 2009 | 08:16 AM
  #6  
Gordon0652's Avatar
TECH Junkie
iTrader: (4)
 
Joined: Sep 2006
Posts: 3,188
Likes: 2
Default

Originally Posted by ls2 bait
Trying to do some homework on nitrous and what I can expect, please help..

Tire size? 28x10.5-15 et drag

N/A times vs Spray times? 10.78@128 vs 9.91@141 (thus far. only 2 attempts)

60ft? 1.57 motor, 1.44 n2o

How much spray? 200 shot

Wet or Dry? wet

Are you spraying off the line? about 5-10 ft out

What gears you have in the rear? 4.10. about to switch to a 3.73

Why to the 3.73s? Been impressed with your build! Going to do almost the same with my driveline!

Sorry for the
Reply
Old Aug 19, 2009 | 08:41 AM
  #7  
racejunky02's Avatar
Thread Starter
10 Second Club
10 Year Member
iTrader: (41)
 
Joined: Mar 2007
Posts: 93
Likes: 0
From: Warfordsburg, Pa
Default

not a problem, having that question answered could help me too...I've never used nitrous so any info is appreciated
Reply
Old Aug 19, 2009 | 10:26 AM
  #8  
purdueranger's Avatar
10 Second Club
iTrader: (11)
 
Joined: Apr 2006
Posts: 858
Likes: 0
From: Indy, IN
Default

Tire size?

28x10.50 ET Drags

N/A times vs Spray times?

high 11s vs 10.7x

60ft?

1.4x to 1.500

How much spray?

150 shot on a nitrous dave wet plate kit

Wet or Dry?

wet

Are you spraying off the line?

hell yeah

What gears you have in the rear?

4.30 gears



I was still trying to dial in the suspension but the car hit the wall before I could finish it. I am sure she had a low 10 second pass in her with tweeking the launch and dial in the shocks along with some killer air. Hot Mid West air in the summer sucks. All the times were from 2 weeks ago in Springfield, MO where I went to the track to race. My summer times now are what the car was running when it was cold outside with stock heads.
Reply
Old Aug 19, 2009 | 11:55 AM
  #9  
racejunky02's Avatar
Thread Starter
10 Second Club
10 Year Member
iTrader: (41)
 
Joined: Mar 2007
Posts: 93
Likes: 0
From: Warfordsburg, Pa
Default

So you didn't wait even a little bit after you took off, you sprayed right from the get go...
Reply
Old Aug 19, 2009 | 12:13 PM
  #10  
ls2 bait's Avatar
9 Second Club
iTrader: (11)
 
Joined: May 2005
Posts: 4,507
Likes: 5
From: in your closet
Default

Originally Posted by Gordon0652
Why to the 3.73s? Been impressed with your build! Going to do almost the same with my driveline!

Sorry for the
trying to make the car more useable on the street as i drive it atleast 4 days a week usually and i go to the track 2-3 times a year. as it sits now i cant use the nitrous at all on the street without taking up 2 lanes and it spins the tires thru the first 2 1/2 gears on the motor.
Reply
Old Aug 19, 2009 | 12:19 PM
  #11  
00silverGTP's Avatar
TECH Apprentice
iTrader: (3)
 
Joined: Jan 2006
Posts: 342
Likes: 0
From: Ohio
Default

Tire size? stock rims with mickey drs
N/A times vs Spray times? 12.8 na 12.2 100shot
60ft? 2.0 on both
How much spray? 100 HSW Plate
Wet or Dry? wet
Are you spraying off the line? set on wot, but I slip the clutch off line to save 10bolt. hence the 2.0 60'
What gears you have in the rear? 342
Reply
Old Aug 19, 2009 | 02:16 PM
  #12  
purdueranger's Avatar
10 Second Club
iTrader: (11)
 
Joined: Apr 2006
Posts: 858
Likes: 0
From: Indy, IN
Default

Originally Posted by racejunky02
So you didn't wait even a little bit after you took off, you sprayed right from the get go...

Right off the line. I let the clutch out and floor it at the same time. it makes for one hell of a ride down the track.
Reply
Old Aug 19, 2009 | 07:21 PM
  #13  
Gordon0652's Avatar
TECH Junkie
iTrader: (4)
 
Joined: Sep 2006
Posts: 3,188
Likes: 2
Default

To add to this : My Plan.
Currently building a 440 LS7.

-28" tire, slick
-Expect a low to mid 10 N/A and very low 9 on the bottle, maybe better.
-150-225 shot
-wet, direct port, standalone with race fuel in the standalone tank
-6-speed, 4.11s
-Most likely spray out of the hole.

Something very similar to ls2 bait setup...

EDIT: i will be at full weight also.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:48 PM.