The transition pipe from my MAF to throttle body thick and larger in diameter than the stock piece. The NOS wet nozzle I have isn't long enough to spray "into" the throttle body. Is there a longer nozzle? I really don't want to drop the funds on a plate.

 

Our black mamba nozzle is slightly longer than the traditional nos nozzles. It also features a 70* exit angle to help spray across the face of the throttle body. You would also need the 1/8NPT nozzle retaining nut. Let me know if you have any questions.

Nick

 

We offer a 1/8th nozzle that will suite your needs to a T.

1-8th Nozzle
http://www.nitrousoutlet.com/catalog...roduct_id=2528

Nozzle Adapter
http://www.nitrousoutlet.com/catalog...roduct_id=2719

-Chris

 

How close does it need to be, my current nozzle is probably just over 1" too short.

 

The key is to make sure the nozzle tip is sticking through far enough that the Bath tub (Discharge area) is not obstructed.
Dave

 

my current nozzle can make it into the air stream, but i believe it's a 90 deg nozzle so it would currently spray the edge of the tb and not towards the center.