Botttle warmer
Thread Starter
Teching In
Joined: Nov 2003
Posts: 11
Likes: 0
Botttle warmer I was wondering how a few of you have a bottle warmer mounted. i have mine on top of the bottle right in the center of it, I was told a few days ago i had it on the wrong way. That it should be mounted under the bottle toward the rear of it. Just wondering if there is any difference between the two.
Originally Posted by DBR TSI
I was wondering how a few of you have a bottle warmer mounted. i have mine on top of the bottle right in the center of it, I was told a few days ago i had it on the wrong way. That it should be mounted under the bottle toward the rear of it. Just wondering if there is any difference between the two.
I have mine mounted in the middle too, I have no problem getting mine heated up. I don't understand how you could have it in the wrong area, as long as it is on the bottle.
TECH Addict
Joined: Feb 2002
Posts: 2,319
Likes: 0
From: Lewisville, Texas
Mine heater is placed on the bottle the same as yours, with the open space between the ends on the bottom. I don't know how much difference it would make to have the space at the top rather than at the bottom once the bottle is hot. I see what they were saying though, heat rises so you could say that you want more of the heater around the bottom of the bottle rather than the top.
TECH Fanatic
Joined: Jun 2003
Posts: 1,070
Likes: 0
From: Further South than Hell
Well allmost, what you want is to heat the mixture of nitrous which makes it expend and gives you more pressure. If you heat the part of the bottle which is not in direct contact with the liquid inside, it will take longer and is less efficient.
