LS7 How much spray?
Thread Starter
Registered User
Joined: Apr 2010
Posts: 4
Likes: 0
LS7 How much spray? I have an 08 Z with diamond nitrous pistons, stock rods and stock crank. Looking for opinions on what the stock rods,block and crank will take, I will use a progressive, window switch, dedicated fuel, Nano kit and spraying through a nitrous outlet 102mm plate kit.
Any help would be appreciated.
Any help would be appreciated.
The rods were never the issue, he took care of that with the new pistons. 200 shot will be fine, could probably go more & still be safe, my motor is built for a 350 shot, I keep it pilled to a 200 just because 800rwhp is plenty.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I agree with about 150 to 200. from my understanding the cylinder wall is not real thick on the ls7 and I have not had alot of experience to pushing the limits on them but I have pleanty of customers doing 150 and 200 on a moded ls7 with great results.
Dave
Dave
TECH Regular
Joined: Dec 2004
Posts: 440
Likes: 0
From: Alpharetta, Ga
I eventually plan to do this exact same setup(stock rods, crank, forged pistons) and I was planning on throwing a 100 to 150 at it. Please update when you get the kit on the car with results 
