ok got my kit about 80% done so far gotta get a few more wires ran and get some odds and ends taken care of.

im needing a rpm pickup for my msd box.. i know the light green wire on pass side coil connector is used alot on the older ls cars it seems . i was wanting to keep all the wiring to the driver side if possible.

2nd im using the nx dbw kit with tps box so i need to get a signal for that

my dbw harnss harness shows
Dark green TP signal 1
Pu tp signal 2
Gy is 5 volt ref.

 

alldata keeps changing the pics on me...

 

tps green wire
rpm signle driver side dark pruple