Nitro Daves plate compatable with a Zex kit?
Thread Starter
TECH Fanatic
Joined: Oct 2005
Posts: 1,131
Likes: 76
From: olympia, wash
Nitro Daves plate compatable with a Zex kit? Want to bump up my kit from the current 75 shot to the full 125 shot that the kit is capable of. I would like to go with the plate because the nozzle keeps moving in my bellows, sometimes by as much as 45 degrees.
Maybe not a big concern with the 75 shot as far as fuel distribution goes, but with the 125 hit it would be a whole different story.
Will the Zex jetting work with the 78 mm plate?
Any input?
Maybe not a big concern with the 75 shot as far as fuel distribution goes, but with the 125 hit it would be a whole different story.
Will the Zex jetting work with the 78 mm plate?
Any input?
Thread Starter
TECH Fanatic
Joined: Oct 2005
Posts: 1,131
Likes: 76
From: olympia, wash
Will your jetting chart still be applicable for a reletively low pressure system like Zex?
Most of the nitrous kits seem to run in the 1000 psi + range, where mine is right at about 900. So how will that effect the plate's distribution?
Will it still be nice and even?
Most of the nitrous kits seem to run in the 1000 psi + range, where mine is right at about 900. So how will that effect the plate's distribution?
Will it still be nice and even?
Thread Starter
TECH Fanatic
Joined: Oct 2005
Posts: 1,131
Likes: 76
From: olympia, wash
