Nitrous line leak issue!
Thread Starter
Teching In
Joined: Sep 2009
Posts: 29
Likes: 0
From: Omaha, Nebraska
Nitrous line leak issue! Can I replace the end connection that connects to the bottle?
Do, I really need to replace the full line from bottle to engine connection area? if I do replace the entire line, should I put in a extra short line connection at the end incase this happens again?
Thanks Robert
Do, I really need to replace the full line from bottle to engine connection area? if I do replace the entire line, should I put in a extra short line connection at the end incase this happens again?
Thanks Robert
You can have a new end crimped on... Most industrial fitting/hose aces can do it. Just make sure you tell them to make sure it's a fitting good for 1500+psi just in case you have some freak overpressurization
Thread Starter
Teching In
Joined: Sep 2009
Posts: 29
Likes: 0
From: Omaha, Nebraska
Thread Starter
Teching In
Joined: Sep 2009
Posts: 29
Likes: 0
From: Omaha, Nebraska
Thanks... for even more help!
I now two more plans, the first one failed yesterday.
The first one was a weak plan, at the end of the day... just want my bottle back.
Thanks guys for the two great plans!
Robert
I now two more plans, the first one failed yesterday.
The first one was a weak plan, at the end of the day... just want my bottle back.
Thanks guys for the two great plans!
Robert
Dave
