Ring Gap shot capabillities
Thread Starter
Registered User
Joined: Feb 2011
Posts: 4
Likes: 0
Ring Gap shot capabillities My engine was built by the previous owner and I am looking at the capabilities of what I can spray the motor. Below are the specs can provide more if need be.
Callies crank 4.125
Lunati Pro Billet Rods
Lunati forged pistons flat top 2cc valve relief 3.903
total seal rings (top gapped 0.023 and bottom gapped 0.18)
compression height on the pistons .978
11.8:1 compression
will be sprayed from a stand alone
Callies crank 4.125
Lunati Pro Billet Rods
Lunati forged pistons flat top 2cc valve relief 3.903
total seal rings (top gapped 0.023 and bottom gapped 0.18)
compression height on the pistons .978
11.8:1 compression
will be sprayed from a stand alone
