Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

need help with jets and stand-alone system

Thread Tools
 
Search this Thread
 
Old Mar 9, 2011 | 09:38 PM
  #1  
aarontracy's Avatar
Thread Starter
On The Tree
iTrader: (17)
 
Joined: Jan 2006
Posts: 100
Likes: 0
From: Paducah, KY
Default need help with jets and stand-alone system

I have an 02 Z06 im running a EFI Vic JR, with a direct port I pieced together. Need help determining what jets I will need for 150,200,250 shots

Im using 2 NOS 16040 Pro-shots and 2 NOS 16050 Fuel Cheaters, those are plumbed into a set of Nitrous Express Directport rails, and Im using NOS foggers not sure what # but its the black 90 degrees with bronze fittings.

I already bought a 1 gallon cell for my dedicated fuel source but what external pump and regulator should I go with?
Reply
Old Mar 9, 2011 | 10:07 PM
  #2  
Graham@NitrousOutlet
Guest
 
Posts: n/a
Default

Originally Posted by aarontracy
I have an 02 Z06 im running a EFI Vic JR, with a direct port I pieced together. Need help determining what jets I will need for 150,200,250 shots

Im using 2 NOS 16040 Pro-shots and 2 NOS 16050 Fuel Cheaters, those are plumbed into a set of Nitrous Express Directport rails, and Im using NOS foggers not sure what # but its the black 90 degrees with bronze fittings.

I already bought a 1 gallon cell for my dedicated fuel source but what external pump and regulator should I go with?
You can not have accurate jetting until you decide what fuel pressure you are going to run.

If you are still working on a stand alone, you can buy the components we use in our stand alones. They are what I would recommend. We can also make sure you have the correct length hoses and fittings.

Get with me tomorrow if you have time and I can get you the product you need sir.

Graham @ N20
Reply




All times are GMT -5. The time now is 01:18 AM.