LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Nitrous Oxide
FJO TPS Programming Issues

Nitrous Oxide Installation | Tuning | Products

Sponsored by:

FJO TPS Programming Issues

Reply Subscribe

Search this Thread

Old

Mar 17, 2011 | 10:29 PM

#1

Thread Starter

Teching In

Joined: Jun 2009

Posts: 11

Likes: 0

Default

FJO TPS Programming Issues

I've been reading about needing to adjust the TPS signal to a falling signal, but in the interface I dont have this as an option. Any ideas? I went through the "TPS Learn Process" but according to the manual, the green light should be on at idle and WOT, and right now its only on at WOT. Any ideas? I attached a picture of what my interface looks like right now...

Attached Thumbnails

FJO TPS Programming Issues-fjo-screen.jpg

Old

Mar 17, 2011 | 10:59 PM

#2

9 Second Club

iTrader: (21)

Joined: Apr 2006

Posts: 3,240

Likes: 1

From: sacramento, CA

Default

I'm pretty sure it should only be on at wot. It was a very simple process

Old

Mar 18, 2011 | 01:20 AM

#3

Thread Starter

Teching In

Joined: Jun 2009

Posts: 11

Likes: 0

Default

Hrrm, weird. I tried to update the firmware, and then it wouldnt come on at all, sigh. Rolled the firmware back, and then it turned on again.

Old

Mar 18, 2011 | 01:48 PM

#4

Thread Starter

Teching In

Joined: Jun 2009

Posts: 11

Likes: 0

Default

I totally misread the manual, you are right. The light should only be on at WOT, which means everything is working.

Old

Mar 18, 2011 | 02:09 PM

#5

9 Second Club

iTrader: (21)

Joined: Apr 2006

Posts: 3,240

Likes: 1

From: sacramento, CA

Default

Quote:

Originally Posted by zlthomps

I totally misread the manual, you are right. The light should only be on at WOT, which means everything is working.

Haha no worries. I havnt read it in awhile but I was pretty sure I was right. Glad you got it figured out.

Reply Subscribe

fjo, ls1, problem, programming

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 04:38 PM.