NOS window switch won't program!!?

Reply Subscribe

Thread Tools

Search this Thread

Aug 8, 2011 | 08:58 PM

00Wildcat

Thread Starter

TECH Regular

Joined: Apr 2008

Posts: 456

Likes: 0

NOS window switch won't program!!?

Put a NOS 2 stage window switch on my 5.3 swap car, went through programing with it just hooked up to power and ground fine. Then after wiring it to all in car the damn thing flashes "pro 9" after holding both buttons then show 1stage rpm on and won't do anything else. I shut power off to it and it resets and displays TPS voltage and if i start car it show voltage and rpm (which is what I need to change now).

Aug 8, 2011 | 09:35 PM

dnkynrbk

9 Second Club

iTrader: (34)

Joined: Mar 2005

Posts: 2,248

Likes: 0

From: SPRINGFIELD MISSOURI

Is it the NOS MINI 2 stage

Aug 8, 2011 | 10:29 PM

00Wildcat

Thread Starter

TECH Regular

Joined: Apr 2008

Posts: 456

Likes: 0

http://www.holley.com/15982NOS.asp

Aug 9, 2011 | 09:13 AM

Graham@NitrousOutlet

Guest

Posts: n/a

You need to get with Kyle@NOS. He is pretty knowledgeable and does a good job with tech.

Aug 9, 2011 | 12:00 PM

00Wildcat

Thread Starter

TECH Regular

Joined: Apr 2008

Posts: 456

Likes: 0

I called the terch line yesterday. don't know who I talked to but he said take it back to where I got it and exchange for another.

Aug 9, 2011 | 01:03 PM

Graham@NitrousOutlet

Guest

Posts: n/a

Quote:

Originally Posted by 00Wildcat

I called the terch line yesterday. don't know who I talked to but he said take it back to where I got it and exchange for another.

Try talking with Kyle. He is by far about the only person at Holly tech I would deal with.

If not I can try and get with them for you.

Aug 9, 2011 | 11:54 PM

00Wildcat

Thread Starter

TECH Regular

Joined: Apr 2008

Posts: 456

Likes: 0

OK I'm a retard. My car is a typical 30 year rundown car that I'm driving while rebuilding. Slowly improving EVRYTHING. One of those projects on the to do after INDY LSX in oct is rewiring the car. so while looking for a 12v ignition wire to tap into, I mistakenly tapped into a wire from the flasher. On my digital volt meter it looked like a good 12v switched supply, but just the slightest load would cause it to pulse. Window switch got mad and wouldn't allow me to program. Good 12v supply and problem solved.