Plugs after 1st nitrous pull

Reply Subscribe

Thread Tools

Search this Thread

Aug 20, 2011 | 09:34 AM

lncboytre_d

Thread Starter

11 Second Club

Joined: Jun 2006

Posts: 304

Likes: 0

From: Lancaster, tx

Plugs after 1st nitrous pull

Here is the plug from bank 1. The car is on a heads and cam tune. I sprayed 50 down the line. Before the pull I installed new BRE7F, let the car idle for about 10 minutes to bring it to 170*, made about a, 1/8 mile pull and immediately cut it off and pulled the #1 plug. There was no timing pulled. Where do I go from here with tuning my car?

Attached Thumbnails

Plugs after 1st nitrous pull-2011-08-20-09.00.37.jpg

Plugs after 1st nitrous pull-2011-08-20-08.59.39.jpg

Plugs after 1st nitrous pull-2011-08-20-09.01.07.jpg

Aug 21, 2011 | 10:40 PM

cbloveday

10 Second Club

iTrader: (1)

Joined: Nov 2010

Posts: 171

Likes: 0

From what I have read,

you do not want to idle on the plug
you may want to check 7 & 8 plug as they are hotter.

Some good info to read while someone more knowledable responds

http://www.dragstuff.com/techarticle...ark-plugs.html
http://www.4secondsflat.com/plug_chart.html

Aug 22, 2011 | 01:17 AM

lncboytre_d

Thread Starter

11 Second Club

Joined: Jun 2006

Posts: 304

Likes: 0

From: Lancaster, tx

Quote:

Originally Posted by cbloveday

Thanks, this is all a learning curve for me. Hopefully a successful one.

Aug 22, 2011 | 10:21 AM

Graham@NitrousOutlet

Guest

Posts: n/a

Hey Trey,

See how the color is up around the top of the porcelain? That is from all the idling. You can not get a good plug read after letting the plug run for 10 min. We need a fresh plug, burnout, pass, shut it down. Otherwise we might be going off the tuneup at idle or part throttle.

Get us a clean read and we will help get you lined out.