Stall and nitrous.
Stall and nitrous. I am going to post this in the N20 section as well as the Auto tranny section.
I have a 226/228 cam and nearly everyother bolt on. I also have a set of stage 1.5 heads from a company no one has heard of. (Air Flow Technolgy)
I make peak power at 6200.
On top of this I spray a 150 wet shot.
I have no tranny in the car right now and this upcoming week it will be going back in. I have a 3500 stall and a 4200 stall both from Yank and dont know which would give me better track numbers.
Which would you guys run for best results?
Thanks
I have a 226/228 cam and nearly everyother bolt on. I also have a set of stage 1.5 heads from a company no one has heard of. (Air Flow Technolgy)
I make peak power at 6200.
On top of this I spray a 150 wet shot.
I have no tranny in the car right now and this upcoming week it will be going back in. I have a 3500 stall and a 4200 stall both from Yank and dont know which would give me better track numbers.
Which would you guys run for best results?
Thanks
I was thinking the same thing. The 4200 will be to much of a stall for a 150 shot.
Tracction is not a problem, as I am one of the few who acturally did the traction part before the overkill power part. I have full suspension minus a K member, and I run 26x10x15 drag slicks. I have ran 1.4 60's already with a 3200 Vig converter on the juice. I will probally do the 3500 looks like 4200 will be too big.
Tracction is not a problem, as I am one of the few who acturally did the traction part before the overkill power part. I have full suspension minus a K member, and I run 26x10x15 drag slicks. I have ran 1.4 60's already with a 3200 Vig converter on the juice. I will probally do the 3500 looks like 4200 will be too big.
Teching In
Joined: Mar 2004
Posts: 8
Likes: 0
If you are going to be spraying the nitrous out of the hole, you need to remember that the nitrous will bring the stall of the converter up. I have 5500 stall converter in my car with a transbrake. With the 300 shot of nitrous, that 5500 becomes 6900. The nitrous makes for a big Torque spike. Just remember that when choosing your converter.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by JZ'sTA
I was thinking the same thing. The 4200 will be to much of a stall for a 150 shot.
Tracction is not a problem, as I am one of the few who acturally did the traction part before the overkill power part. I have full suspension minus a K member, and I run 26x10x15 drag slicks. I have ran 1.4 60's already with a 3200 Vig converter on the juice. I will probally do the 3500 looks like 4200 will be too big.
Tracction is not a problem, as I am one of the few who acturally did the traction part before the overkill power part. I have full suspension minus a K member, and I run 26x10x15 drag slicks. I have ran 1.4 60's already with a 3200 Vig converter on the juice. I will probally do the 3500 looks like 4200 will be too big.
So i think it matters which convertors you have . What are they? we know the stall ratings(3500/4200) but which ones are they?
Dave
