Nitrous problem
Nitrous problem I have a 02 T/A with lid, no screen in maf and smooth bellow. The car runs fine on motor and didnt have a problem on spray till I hooked my NANO kit up. I am not saying it is the NANO KITS fault but it just started happening. All that has been changed is i stopped the fuel leak I had and went from 3" to 3" to a 3" to 4" and had the NANO valve put in my bottle. Every time I spray the car falls on its face or sputters and pops and I have went through all the lines and wires and it sprays fine seems like when I had the fogger out Fuel seems to be ok but im not sure and I have no gauge. I am running TR6 @ .35 not sure whats going on it was fine then wont run right the fogger is right before my maf if it helps any.
Sounds like its going really rich. Never heard a whole lot of good out of the nano kits. Did you pull a plug? Or have a wideband. I believe they usually recommend a jet change when going nano don't they?
I have a 02 T/A with lid, no screen in maf and smooth bellow. The car runs fine on motor and didnt have a problem on spray till I hooked my NANO kit up. I am not saying it is the NANO KITS fault but it just started happening. All that has been changed is i stopped the fuel leak I had and went from 3" to 3" to a 3" to 4" and had the NANO valve put in my bottle. Every time I spray the car falls on its face or sputters and pops and I have went through all the lines and wires and it sprays fine seems like when I had the fogger out Fuel seems to be ok but im not sure and I have no gauge. I am running TR6 @ .35 not sure whats going on it was fine then wont run right the fogger is right before my maf if it helps any.
Are you pulling any timing?
You will also need to switch to a br7ef plug @.032-.034.
If you could give me a call at the shop 785-331-2390. I can help you run through your nitrous system to find the issue.
