Another killer cam from Patrick G!
Thread Starter
10 Second Club
iTrader: (14)
Joined: Oct 2005
Posts: 1,384
Likes: 4
From: Concord, NC
Another killer cam from Patrick G! My formula has been running a Pat G cam in it , finally got a chance to put it on the rollers with nitrous . It's a custom grind for a 402 with l92 heads. On the n20 tune (20* of timing) it was 481/487 and on a .72 jet it put down 665/760. The car is loving the nitrous with this setup. Big thanks to Pat for speccing out a great cam! Car is a 6 spd with a 9" and 4.11 gears on 28" tires. Tuned by me with HP tuners
Last edited by WheelsUp84z; Oct 29, 2011 at 05:42 PM.
Thread Starter
10 Second Club
iTrader: (14)
Joined: Oct 2005
Posts: 1,384
Likes: 4
From: Concord, NC
Thread Starter
10 Second Club
iTrader: (14)
Joined: Oct 2005
Posts: 1,384
Likes: 4
From: Concord, NC
No i should have mentioned that, its about 1000 rpm's off. It was up to 2000 rpm's off on some other peoples cars. The pull was made to 7000 not like 6000 as the graph shows.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
