Help me! TNT power ring
01-03-2002, 10:27 AM
#1
Formerly 4mulaJoe
Thread Starter
iTrader: (11)
Join Date: Nov 2001
Location: hou
Posts: 2,763
Likes: 0
Received 0 Likes
on
0 Posts
Help me! TNT power ring Does anybody have a good way to get the tnt power ring OFF? I know some people have had fitment problems, but mine went on good and snug by just tapping it with a rubber mallet. I'm taking it off to sell it and go into the topend of the motor.
Thanks for any help.
joe
Thanks for any help.
joe
01-03-2002, 02:13 PM
#3
TECH Fanatic
iTrader: (2)
Join Date: Nov 2001
Location: Killeen, Texas
Posts: 1,655
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help me! TNT power ring Pull the throttle body off of the car. Use the handle of a hammer, the wooden part and place it against the power ring. Hit the head of the hammer with a hammer and it should come off. The wooden handle is to keep from damaging the ring.
01-04-2002, 01:41 AM
#7
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help me! TNT power ring Mine fits pretty snug as well, but I can still get it off by grasping the two nozzles on either side and wiggling it back and forth till it pulls off.
Trending Topics
01-04-2002, 05:55 AM
#8
TECH Regular
Join Date: Nov 2001
Location: Barberton, OH
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help me! TNT power ring [quote] Mine fits pretty snug as well, but I can still get it off by grasping the two nozzles on either side and wiggling it back and forth till it pulls off. <hr></blockquote>
DanZ28 is right.Its not that hard. I hate putting them on though <img src="gr_eek2.gif" border="0">
DanZ28 is right.Its not that hard. I hate putting them on though <img src="gr_eek2.gif" border="0">
01-04-2002, 11:26 AM
#9
Formerly 4mulaJoe
Thread Starter
iTrader: (11)
Join Date: Nov 2001
Location: hou
Posts: 2,763
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help me! TNT power ring Well I got it off. I took the tb off. Mine was tighter than you guys have said yours was. I would have broken the nozzles doing that. I had to take a bock of wood and hammer after it for like 20 minutes after i got the tb off last night. I cracked the damn fuel pressure etst port taking off my fpss also <img src="gr_sad.gif" border="0">