Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Purge stuck open, coil won't come off the stem.

Thread Tools
 
Search this Thread
 
Old 04-14-2012, 07:08 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
Obsidiansixer's Avatar
 
Join Date: Mar 2008
Location: Virginia
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts

Default Purge stuck open, coil won't come off the stem.

Just as the title says, I went to test my new digital nitrous pressure guage and had my gf purge it... The solenoid stuck open, drain most of my bottle before I shut the bottle and it is still stuck open. So I went to look at the plunger expecting to find some type of debree, but can't seem to pull the coil off the stem. Any suggestions or maybe some schooling on what's going on? It's an NX solenoid.

Thanks,
-Rick
Old 04-20-2012, 04:03 PM
  #2  
Chris@NitroDaves
Guest
 
Posts: n/a
Default

Unfortunately if the coil wont come off then there is no hope on saving the noid. What happened is the coil got so hot it welded itself to the tower.



Quick Reply: Purge stuck open, coil won't come off the stem.



All times are GMT -5. The time now is 08:49 AM.