E-85 jetting for carb setup
E-85 jetting for carb setup I have a 93 mustang coupe with a lq4,l92 heads, with a 750 holley setup for e-85. My question is where do I start for jetting with a plate system. The kits an edelbrock plate kit. Tried calling edelbrock on where to start and they say they don't deal with e-85. Any help would be great Thanks.
Please let me know what other info you need to help.
Please let me know what other info you need to help.
A lot of people say to start with the manufactures recommended jetting for gas and it will be pretty close to right with e85 since they always have the tuneups rich in the instructions.
FormerVendor
Joined: Feb 2012
Posts: 634
Likes: 0
From: Waco, TX
Do you have jetting already for non E-85 on 6.5 psi??? if so you can add 28% to the fuel side and you should be good. If you do not already have jetting pm or call us and we can get you squared away.
And this is why N20 outlet is the best for Late Model vehicles or anything that is considered "too new" or "we don't do that here".
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
