Will i run into problems with Hypertech/160 stat and a 100 wet shot? Someone said i have to adjust the retard, is this correct?
How would i do this?

Thanks

 

If your running a 100 hp and the 160 degree t-stat you should be ok.It would be a good idea to get auto tap or a scan tool to check for knock retard. If you do have kr ram charger is making a retard device and it should be avalible in about a week and a half.Rich

 

Everyone has told me to just not use any power programming (987/93 octane settings) at all when spraying.

 

I have a the power programming and the 160 stat. Any one have any more ideas?

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by .....00Z28.....:
<strong>I have a the power programming and the 160 stat. Any one have any more ideas?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I will say it does not cause any damage, but it is not recomended to use the hpp3 tuning and run any n2o. but i used to run the tuning with a 150 shot and had no problems