Bottle Mounting??
Thread Starter
On The Tree
Joined: Feb 2002
Posts: 148
Likes: 0
From: Round Rock, TX USA
Bottle Mounting?? Anyone have any pics/write ups for mounting a bottle in the spare tire well using a custom/fabricated mounting plate for the bottle brackets? I don't want to bolt through the wheel well.
TIA,
Kyle
<small>[ April 08, 2002, 11:20 AM: Message edited by: LS1 Kyle ]</small>
TIA,
Kyle
<small>[ April 08, 2002, 11:20 AM: Message edited by: LS1 Kyle ]</small>
TECH Senior Member
Joined: Nov 2001
Posts: 11,603
Likes: 0
From: Chi-Town, IL
Re: Bottle Mounting?? Country Boy, can you give me the measurements on that piece of wood, I want to have one made identical to that...I was going to just take a piece of plywood and lay it in there and then just drill, but I would rather have the exact measurements..
Thanks,
Bos
Thanks,
Bos
Re: Bottle Mounting?? To be honest with ya, There is no specific measurements. (no straight edges) Just take a piece of cardboard and start cutting and trimming. Thats all I did. It took a few, but worth it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
On The Tree
Joined: Feb 2002
Posts: 148
Likes: 0
From: Round Rock, TX USA
Re: Bottle Mounting?? Hey guys, I took a few hours last night and built a custom mounting plate for the bottle. I'll post pics on my site tonight and post the links back here.
<small>[ May 06, 2002, 07:39 AM: Message edited by: LS1 Kyle ]</small>
<small>[ May 06, 2002, 07:39 AM: Message edited by: LS1 Kyle ]</small>
Thread Starter
On The Tree
Joined: Feb 2002
Posts: 148
Likes: 0
From: Round Rock, TX USA
Re: Bottle Mounting?? OK, here's what I've got so far. Just a few pics and I don't have any that actually show the bottle b/c I'm waiting on my new bottle to come in. I'm planning on making a diagram that shows the exact dimesions of the plate, so let me know if you're intersted on getting a copy.
I'm not sure if this will fit in the Camaro well or not. I need to get someone down here to try it out for me.
Anyways, here's the link. Click on the "Nitrous Bottle Mount" link on my main page.
http://www.kyle-mckenzie.com/home/my_ls1/index.asp
Kyle
<small>[ May 06, 2002, 10:22 PM: Message edited by: LS1 Kyle ]</small>
I'm not sure if this will fit in the Camaro well or not. I need to get someone down here to try it out for me.
Anyways, here's the link. Click on the "Nitrous Bottle Mount" link on my main page.
http://www.kyle-mckenzie.com/home/my_ls1/index.asp
Kyle
<small>[ May 06, 2002, 10:22 PM: Message edited by: LS1 Kyle ]</small>
Re: Bottle Mounting?? ive got mine mounted in the rear well. i drilled the line thru the rearwell and screwed the mounting brace to the rear well. but if anyone wants a pic i can send it if you want to post it here. i dont have anyway to post it.
Jerry
Jerry
Thread Starter
On The Tree
Joined: Feb 2002
Posts: 148
Likes: 0
From: Round Rock, TX USA
Re: Bottle Mounting?? OK, the diagram with measurements is up on my site. My new bottle just came in so I might be able to post a few pics soon with the bottle actually mounted on the plate.
Good luck. All I used to make it was a tape measure, straight-edge and jigsaw. If you didn't get the link to my site, here it is again:
http://www.kyle-mckenzie.com/home/my...late/index.asp
Good luck. All I used to make it was a tape measure, straight-edge and jigsaw. If you didn't get the link to my site, here it is again:
http://www.kyle-mckenzie.com/home/my...late/index.asp
