Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

N20 Jetting help

Thread Tools
 
Search this Thread
 
Old Jul 25, 2012 | 03:06 PM
  #1  
jallen100's Avatar
Thread Starter
Staging Lane
iTrader: (4)
 
Joined: Feb 2011
Posts: 82
Likes: 0
From: Columbus, Ohio
Default N20 Jetting help

So I purchase a 98 Firebird LS1 car about a month and a half ago and I am getting ready to spray the car. The car came with what appears to be a TNT kit but it has a NOS Super Pro Shot N20 solenoid and a Cheater fuel Solenoid. I have no idea what jets to start with I want to start off with a 100 shot. Can anyone give me some advice please?
Reply
Old Jul 25, 2012 | 04:49 PM
  #2  
w3s1c0a5t's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: Nov 2008
Posts: 726
Likes: 0
Default

Is it a single nozzle system?
Reply
Old Jul 26, 2012 | 01:35 PM
  #3  
jallen100's Avatar
Thread Starter
Staging Lane
iTrader: (4)
 
Joined: Feb 2011
Posts: 82
Likes: 0
From: Columbus, Ohio
Default

Originally Posted by w3s1c0a5t
Is it a single nozzle system?
No, there is a nozzle on each side of the ring. So a total of 2.
Reply
Old Jul 30, 2012 | 10:36 AM
  #4  
jallen100's Avatar
Thread Starter
Staging Lane
iTrader: (4)
 
Joined: Feb 2011
Posts: 82
Likes: 0
From: Columbus, Ohio
Default

Bump!!
Reply
Old Jul 30, 2012 | 12:16 PM
  #5  
clonedws6's Avatar
TECH Apprentice
iTrader: (6)
 
Joined: Mar 2007
Posts: 307
Likes: 1
From: Indiana
Default

Look up the TNT jetting card, should be a pic on here
Reply
Old Jul 31, 2012 | 02:35 PM
  #6  
jallen100's Avatar
Thread Starter
Staging Lane
iTrader: (4)
 
Joined: Feb 2011
Posts: 82
Likes: 0
From: Columbus, Ohio
Default

Originally Posted by clonedws6
Look up the TNT jetting card, should be a pic on here
Yeah it is on here but that is with TNT solenoids and I have NOS solenoids. I dont believe that what I have are the same that came with the kit.
Reply
Old Aug 2, 2012 | 09:18 AM
  #7  
rmata's Avatar
TECH Regular
iTrader: (34)
 
Joined: Mar 2004
Posts: 423
Likes: 0
From: Corpus Christi, TX
Default

Do you know what the orifice size of the old TNT solenoids are? Might be hard to fid out, but I would just start out with the TNT recommended jetting. That will get you close enough on the smaller shots and then go from there.
Reply
Old Aug 2, 2012 | 10:34 AM
  #8  
87silverbullet's Avatar
TECH Veteran
iTrader: (11)
 
Joined: Mar 2007
Posts: 4,873
Likes: 8
From: Slidell,LA
Default

Originally Posted by jallen100
Yeah it is on here but that is with TNT solenoids and I have NOS solenoids. I dont believe that what I have are the same that came with the kit.
Doesn't really matter who the solenoids are from. It just matters about the jets fitting in the nozzle.

I have mixed and matched kits so many times that I have lost count.
Reply
Old Aug 3, 2012 | 11:53 AM
  #9  
jallen100's Avatar
Thread Starter
Staging Lane
iTrader: (4)
 
Joined: Feb 2011
Posts: 82
Likes: 0
From: Columbus, Ohio
Default

Originally Posted by 87silverbullet
Doesn't really matter who the solenoids are from. It just matters about the jets fitting in the nozzle.

I have mixed and matched kits so many times that I have lost count.
Perfect, that is what I was looking for.
Reply




All times are GMT -5. The time now is 11:27 AM.