MS4 with 150 or 200 shot
Thread Starter
Teching In
Joined: Mar 2006
Posts: 18
Likes: 0
MS4 with 150 or 200 shot I have a 99 z28 with ms4 and stock heads forged pistons and rods. The motor made 400hp and like the title said I am looking to hit it with a 150 and a 200 shot. The kit is a 90mm plate and I would like some ideals on what plugs and gaps to use. Thanks!
Whats the static compression? Pump gas?
i have the ms4, and have hit it with 150 without a problem. Some guys have done upwards of 250 on this cam. Br7efs would be good plug at .32, If you go to 200 switch it up to an
b8efs. Good luck with the set up, I went a 6.59(1/8) with mine, and it was pig rich. Hope to get her dialed in and do a lil better.
b8efs. Good luck with the set up, I went a 6.59(1/8) with mine, and it was pig rich. Hope to get her dialed in and do a lil better.
Last years when i was MS4 i sprayed 250hp with TNT F2 power ring and put down 620rwhp
Mods
2001 WS6
high performance ARP bolts for rods
Diamond 3.905 pistons
4.10
stock 241 heads
Full exhaust 1 3/4 , Ypipe , SLP loudmouth
250HP TNT
Follow us ( FACEBOOK )
www.facebook.com/wsseven
https://www.facebook.com/media/set/?...0493575&type=3
Youtube
www.youtube.com/AlzilzilRacing
Mods
2001 WS6
high performance ARP bolts for rods
Diamond 3.905 pistons
4.10
stock 241 heads
Full exhaust 1 3/4 , Ypipe , SLP loudmouth
250HP TNT
Follow us ( FACEBOOK )
www.facebook.com/wsseven
https://www.facebook.com/media/set/?...0493575&type=3
Youtube
www.youtube.com/AlzilzilRacing
