dry nitrous set-up question
Thread Starter
Launching!
Joined: Jan 2002
Posts: 243
Likes: 0
From: california
dry nitrous set-up question hey, im new here nad hope you guys could give me some info. i was wondering if it matters if you mount the nozzle before or after the maf sensor? i know the maf take reading of the incomming air, but wouldnt the o2 sensors also adjust for the a/f raito also?
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
Re: dry nitrous set-up question w/a dry kit you are relying on your MAF to adjust the fuel... I'm pretty sure it has to be pre-maf.
It would be very bad if you sprayed after the maf, engine went way lean... and kaboom!
It would be very bad if you sprayed after the maf, engine went way lean... and kaboom!
Teching In
Joined: Apr 2002
Posts: 3
Likes: 0
From: Midwest
Re: dry nitrous set-up question Install for dry system is always before the MAF. The O2 sensors will pick it up only after the damage is done...after the nitrous has gone past the pistons. Fast SS on NOS is an expert, Email him. Or check the colonels N2O tech files.
<small>[ May 08, 2002, 11:15 AM: Message edited by: toeffer ]</small>
<small>[ May 08, 2002, 11:15 AM: Message edited by: toeffer ]</small>
