Nitrous Dont hit hard
Nitrous Dont hit hard Ive been having a delima with my car. The kit i have is a NX kit and it had the shark nozzle. I used it on my gt and with a 125 it hit insanely hard. So i sold the car kept the kit put in on my TA. Timing pulled 4 degrees and 150 shot with a dual stage nitous outlet plate using only 1 stage. With bottle pressure at 1050 fresh bottle, lines purged, jets in correctly the car hits the same as the nozzle did on a 50 shot?!?!?!? I dont understand what keeps it from hitting hard the car went from a 8.33 on motor to a whopping 8.01 first pass on nitrous and sprayin gout the gate it went 7.88 this is on et street 27x11.5x16 the 60ft are almost the EXACT same on and off spray cars not spinning or anything. Anyone that can share some light on this please do thanks. Im thinking of going back to the nozzle to see will that make a difference.
Just got back from a test hit car hits hard even with only 800 psi but I still have the pause on initial hit what could cause that? Afr is 11.1 all the way across the rpm range any ideas
Trending Topics
What jets do you have in? What timing are your running? What plugs?
11.1 is rich.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Fanatic
Joined: Sep 2003
Posts: 1,058
Likes: 1
at 800psi and 11.1, it at least appears its probably rich as hell when you hit it then cleans up. then again, post a plug up for review.
FormerVendor
Joined: Feb 2012
Posts: 634
Likes: 0
From: Waco, TX
You could be having a little bit of a lean spike or a rich condition in the beginning of the shot. Do you have a fuel pressure gauge? What are you running fuel system and what kind of mods do you have?
