Darts for a Big Shot of Nitrous..
08-25-2012 | 10:05 PM
#1
Thread Starter
Joined: Sep 2004
Posts: 545
Likes: 2
From: South Texas
Darts for a Big Shot of Nitrous.. Hi guys, its been a long time since I posted here and one of the last times was about wanting to cnc or port my darts 225's..
Well around that time I did send them out to Brian Tooley and he did an awsome job on them.
But until now I was able to sent them to a machine shop to get them flow test and a valve job, well here are the results, one is before the valve job the other after.. what do you all think?
BTW here are the flow numbers out of the box..
Int. Exh.
.200 144 109
.300 202 154
.400 254 187
.500 290 205
.600 313 214
Well around that time I did send them out to Brian Tooley and he did an awsome job on them.
But until now I was able to sent them to a machine shop to get them flow test and a valve job, well here are the results, one is before the valve job the other after.. what do you all think?
BTW here are the flow numbers out of the box..
Int. Exh.
.200 144 109
.300 202 154
.400 254 187
.500 290 205
.600 313 214
Last edited by JJ_TURBO; 08-25-2012 at 10:23 PM.
08-27-2012 | 08:14 PM
#3
That exhaust port has Brian Tooley written all over it!
Looks like he really brought the I/E% up well!
Do you know if the exhaust was flowed with a fixture in place i.e. a pipe?
Looks like he really brought the I/E% up well!
Do you know if the exhaust was flowed with a fixture in place i.e. a pipe?
