need inline fuel pump help
thanks
jerry
I would think whoever sold it would be able to send U diagrams and suggested installation procedures !! <img border="0" title="" alt="[Embarrassed]" src="gr_emb.gif" />
<small>[ March 22, 2003, 07:13 PM: Message edited by: Orange Krush ]</small>
basically do i just splice the walbro into the fuel line in between the pump and the filter? where do/should i run the positive terminal to? thanks
jerry
<strong>im gonna see if one of the sponsors can help me out if no ones else will. the guy i bought it from didnt have the instructions and never installed it.
basically do i just splice the walbro into the fuel line in between the pump and the filter? where do/should i run the positive terminal to? thanks
jerry</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Top connector 2nd wire over (gray) splice into that and your inline will go on with the stock pump.. Ground the other side. This is the connector above the axle on the drivers side.. Hope this helps.
thanks dude. did the placement of the pump sound right?
jerry
thx for the input.
jerry
Trending Topics
The Best V8 Stories One Small Block at Time
dont they send instructions, it was easy now that i know how to do it lol, but at first iwasnt sure. all is good tho.
Jerry
<strong>yea!! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
dont they send instructions, it was easy now that i know how to do it lol, but at first iwasnt sure. all is good tho.
Jerry</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You ARE using a power relay and a 10 gauge power wire directly from the battery to the inline right?? If not you should install one because under a high load the inline pump needs more current than the small stock wire can provide.

