NOS Nitrous bottle blow down fitting
09-27-2012, 02:06 PM
#1
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Dec 2008
Location: Pensacola, Fl
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
NOS Nitrous bottle blow down fitting Does anyone know the size fitting for a NOS bottle blow down fitting? I did some searching and it seems that the NOS bottles have different fittings than some of the others. I'm planning on making my own -8AN braided line blow down tube (yes, with a bulkhead), but dont know what the fitting for the bottle is. Thanks in advance!
09-28-2012, 10:30 PM
#3
its a burst disc fitting
http://www.nitrousoutlet.com/catalog...9&product=2550
then the blow out side uses an 8an fitting
burst disc goes between the bottle and the fitting
follow direction.. torque to 15 ft-lbs
over torquing will damage burst disc and make it blow off at a much earlier pressure(like a couple of hundred psi instead of a couple of thousand psi..)
http://www.nitrousoutlet.com/catalog...9&product=2550
then the blow out side uses an 8an fitting
burst disc goes between the bottle and the fitting
follow direction.. torque to 15 ft-lbs
over torquing will damage burst disc and make it blow off at a much earlier pressure(like a couple of hundred psi instead of a couple of thousand psi..)
