Nitrous cam!
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
Nitrous cam! We added this camshaft to our site not too long ago and I wanted to let you guys know that we now offer this as part of our Elite Series of Camshafts I designed.
This cam would be for guys that are going to solely run on nitrous and are spraying 250+ worth of nitrous.
If you're planning on spraying less than that or plan on running on motor a lot, a profile ground to your set-up would be much more appropriate. I'm not saying it won't run on motor at all or will be a turd, but you would have better results with a different profile than this.
I purposely designed this cam for the stock short block guys that are spraying a lot of nitrous, stock cubic inch forged short block guys and the 364-383 cubic inch crowd that really didn't have anything readily available aside from custom profiles for their applications.
You'll find a link to the cam here:http://www.tickperformance.com/tick-...1-ls6-engines/
And if you have any questions about it or any of our other camshafts feel free to contact me or anyone at the shop in whatever way is most convenient for yourself.
Thanks for looking.
This cam would be for guys that are going to solely run on nitrous and are spraying 250+ worth of nitrous.
If you're planning on spraying less than that or plan on running on motor a lot, a profile ground to your set-up would be much more appropriate. I'm not saying it won't run on motor at all or will be a turd, but you would have better results with a different profile than this.
I purposely designed this cam for the stock short block guys that are spraying a lot of nitrous, stock cubic inch forged short block guys and the 364-383 cubic inch crowd that really didn't have anything readily available aside from custom profiles for their applications.
You'll find a link to the cam here:http://www.tickperformance.com/tick-...1-ls6-engines/
And if you have any questions about it or any of our other camshafts feel free to contact me or anyone at the shop in whatever way is most convenient for yourself.
Thanks for looking.
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
I can spec you out a cam for anything that is a 4 stroke!
