descreen MAF with nitrous??
Thread Starter
Teching In
Joined: Jul 2002
Posts: 25
Likes: 0
From: cape coral, fl
descreen MAF with nitrous?? i'm currently installing a TNT F1 nitrous kit on my ws6 and i need to know if descreening my MAF would cause my car to run too rich or too lean. i'm planning on running the 100 shot, and i have macs, oyp, lid & filter, free mods, ST3500. thanks!
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
Re: descreen MAF with nitrous?? I had heard that it's best to leave the MAF screened... but I dont know for sure if that's the case.
I'm using my stock maf, screened and all for nitrous
I'm using my stock maf, screened and all for nitrous
Staging Lane
Joined: Mar 2002
Posts: 85
Likes: 0
From: Northern CA.
Re: descreen MAF with nitrous?? I am using Thunder Racing Ported MAF Ends with my lid and K&N
http://home.attbi.com/~wegetourmail/...ID-230425.html
All I can say is that on *my* car it runs VERY strong with the 100 shot (5177.)
But I have also found that MAF's and LS1's are finicky and each car acts differently. You must find the best setup for your own car.
For example some people swear by GMAF's. Yet it made me lose 3/10's. Removed it, gained 3/10's.
Others swear by stock MAF's even though cars Dyno higher with descreened MAF's. So I went ported ends on mine and it worked.
Go figure.
http://home.attbi.com/~wegetourmail/...ID-230425.html
All I can say is that on *my* car it runs VERY strong with the 100 shot (5177.)
But I have also found that MAF's and LS1's are finicky and each car acts differently. You must find the best setup for your own car.
For example some people swear by GMAF's. Yet it made me lose 3/10's. Removed it, gained 3/10's.
Others swear by stock MAF's even though cars Dyno higher with descreened MAF's. So I went ported ends on mine and it worked.
Go figure.
