Here are the long awaited pics for anybody who cares.

Engine Bay.
<img src="http://www.boomspeed.com/mylswon/NitrousInstall1.jpg" alt=" - " />
Here is the tank, mounted on the hump in front of the t-top storage area and behind the rear passenger seats which were completely removed. We Had to make a custom bracket mount (the wood) so we didn't puncture the fuel tank - We are 3/16" away from it <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> . I'm going to get the same color 'neutral' interior and have that over the board so it looks a lot cleaner.
<img src="http://www.boomspeed.com/mylswon/NitrousTank.jpg" alt=" - " />
Here is the purge kit from the engine bay. I still have to get wire loom to cover the brass tubing and some of the wires.
<img src="http://www.boomspeed.com/mylswon/Purge.jpg" alt=" - " />
Here is the dual purge...
<img src="http://www.boomspeed.com/mylswon/Purge2.jpg" alt=" - " />

 

I can actually reach the bottle from the drivers seat. I guess I dont like the idea of it being behind my seat. For one, Im pretty tall so I need to have my seat back, and then reclineda bit. My passengers are always the same way so there wouldnt really be enough room.

I also need to the t-top storage and the side for the sub. So, thats how we chose that mounting location. Im sure I can change it in the future, there were no holes drilled in the back through the carpet.

 

looks good. you can clean it up a lot as you go, too. Also, if your back seats are gone, why not mount the bottle on the passenger side seat bottom area. that way you can open it at will and not have to get out or lean way back.

Ryan