Nitrous install help ASAP
Thread Starter
TECH Apprentice
Joined: Jun 2002
Posts: 301
Likes: 0
From: Fayetteville, NC
Nitrous install help ASAP Can someone please tell me which wires to tap into for installing the TPS switch and the MSD window switch? I am installing a NX wet kit on my 2000 SS. Also, if anyone has any good pics of their install to give me helpful ideas on the wire routing and placement for ease of install please send.
Thanks,
Scott
purevilss@aol.com
Thanks,
Scott
purevilss@aol.com
TECH Enthusiast
Joined: Nov 2001
Posts: 526
Likes: 0
From: Orange, TX
Re: Nitrous install help ASAP Looks like it's the #24 wire, dark blue on the red C2 connector.
Here's where I got it from: http://www.ls1.com/2002pcm.htm
Here's where I got it from: http://www.ls1.com/2002pcm.htm
TECH Enthusiast
Joined: Nov 2001
Posts: 526
Likes: 0
From: Orange, TX
Re: Nitrous install help ASAP Oops...gave you the 2002 link by mistake. Here's the one for 2000 models. Looks like it's the same wire. http://www.ls1.com/00pinpcm.htm
The #10 white wire is the tach wire on my '99, and probably the same on your 2000. Maybe you're confusing the TPS wire with the tach wire
The #10 white wire is the tach wire on my '99, and probably the same on your 2000. Maybe you're confusing the TPS wire with the tach wire
