Please help with nitrous question!!!
Please help with nitrous question!!! I had a 125 wet shot jets intalled with 5*of timing pulled. I upped the shot to 150 and pulled 6* of timing, bit the 125 felt like it hit much harder and moved faster... is this possible? Or should I leave timing for 150 shot at 5*?
Bottle pressure was the same... 900-1000ish.
Not the fuel, have a racetronix installed.
Jets are 63nitrous 35fuel, hsw kit.
Timing pulled 6*
Could it be blowing through the converter? I had it spec'd out for nitrous tho.
Car is mechanically sound, no issues... a friend said if it runs rich in fuel it'll slow me down but be safe. He also mentioned that 35fuel maybe on the rich side.
Not the fuel, have a racetronix installed.
Jets are 63nitrous 35fuel, hsw kit.
Timing pulled 6*
Could it be blowing through the converter? I had it spec'd out for nitrous tho.
Car is mechanically sound, no issues... a friend said if it runs rich in fuel it'll slow me down but be safe. He also mentioned that 35fuel maybe on the rich side.
Last edited by LASTOFTHEBREED02T/A; Apr 7, 2013 at 12:31 PM.
Rich is not safe and a 38f for that shot is super rich. You need to learn and plugs, or at least get a wideband as a guide. I bet if you drop 7-8 fuel jet sizes, you'll feel it then!
Trending Topics
Edit edit edit!!! The fuel pill is 35... sorry for the confusion.
So I have, 63 nitrous and 35 fuel for 150 shot.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo http://www.dragstuff.com/techarticle...-pictures.html
Though, the last three pics with the threads cut off are too rich for my liking.
Though, the last three pics with the threads cut off are too rich for my liking.
http://www.dragstuff.com/techarticle...-pictures.html
Though, the last three pics with the threads cut off are too rich for my liking.
Though, the last three pics with the threads cut off are too rich for my liking.
Replaced spark plugs and gave it a hit I changed the spark plugs (br7ef) and made some small pulls on the 150 hit. It didnt feel any stronger, even though the bottle pressure was at 900 psi but low on liquid, still felt a kick to it though.
I pulled the plugs soon after to check them out, seemed ok, but then again not sure if it was because the bottle low.
I Couldn't upload pics, guess my phone takes em too big, Please follow the link below, and go to post #750.
http://www.thirdhonk.com/community/i...ly.690/page-38
The two pics above where of plugs i used when running a dry hit, with no timing pulled and completely unsafe.
The 3 pics below on that post are the new ones I pulled out after i made the pulls.
Thoughts?...
Could it be just my solenoid not keeping up with the nitrous demand and freezing up?
I pulled the plugs soon after to check them out, seemed ok, but then again not sure if it was because the bottle low.
I Couldn't upload pics, guess my phone takes em too big, Please follow the link below, and go to post #750.
http://www.thirdhonk.com/community/i...ly.690/page-38
The two pics above where of plugs i used when running a dry hit, with no timing pulled and completely unsafe.
The 3 pics below on that post are the new ones I pulled out after i made the pulls.
Thoughts?...
Could it be just my solenoid not keeping up with the nitrous demand and freezing up?