Spraying a dry shot through a "Wet" plate
04-11-2013, 04:11 PM
#1
Teching In
Thread Starter
Join Date: Mar 2013
Location: Texas
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Spraying a dry shot through a "Wet" plate I have a NOS 90mm "wet" Nitrous plate that I want to spray dry, by blowing through the nitrous and the fuel fitting, I notices that the "Fuel" orifice is smaller than the nitrous side. on my old dry plate, .36 on both sides would be 100shot on my old plate kit.
Has anyone done this on a NOS 90mm plate? trying to see if this formula will still work or i'll have to compensate with a bigger jet on the "Fuel" side
Has anyone done this on a NOS 90mm plate? trying to see if this formula will still work or i'll have to compensate with a bigger jet on the "Fuel" side
04-13-2013, 08:42 AM
#2
Launching!
Join Date: Oct 2006
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
no idea about the nos plate,but my biggest fuel jet was a .46 which i used for a 75 dry shot on the 1st stage for a while...
i spray a baby 200 dry shot 2 stage,(100-100)thru a nitrous outlet wet plate...
i spray a baby 200 dry shot 2 stage,(100-100)thru a nitrous outlet wet plate...
