Would these two gauges be adequate for spray?
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,064
Likes: 0
From: CA
Would these two gauges be adequate for spray? I think I am going to go with these autometer gauges:
Phantom 5774 2-1/16" Nitrous Pressure 0-1600 PSI
Phantom 5764 Hi-Lo Fuel Press. 0-100 PSI
These are both electric full-sweep gauges. I was also considering an EGT guage instead of the fuel pressure. Any other recommendations or are these fine.
Phantom 5774 2-1/16" Nitrous Pressure 0-1600 PSI
Phantom 5764 Hi-Lo Fuel Press. 0-100 PSI
These are both electric full-sweep gauges. I was also considering an EGT guage instead of the fuel pressure. Any other recommendations or are these fine.
Re: Would these two gauges be adequate for spray? those 2 are a good start, adding a egt would not be a bad idea, but with those 2 you can keep a good eye on whats going on. Make sure not too much nitrous, and not short on the gasoline.
Ryan.
Ryan.