2-step with a wide open throttle system
01-07-2014, 12:32 AM
#22
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: May 2006
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys for all the info. Ok so I have another question, I just got a lnc-2000 so how would I wore that up to pull timing as I'm spraying but while not having the 2step part of it not on while I'm shifting? If that makes sense. Any help is much appreciated.
Happy new years guys
Happy new years guys
04-19-2017, 12:26 PM
#24
I have the button on my shifter wired inline with my lnc 2-step. Clutch in, button pushed - 2 step active. Release either and it's off.
When spraying I leave at 3/4 throttle and then go WOT when releasing the clutch. That way it's not spraying on the 2step. I also found I can leave at a lower rpm and let the n2o do the work.
When spraying I leave at 3/4 throttle and then go WOT when releasing the clutch. That way it's not spraying on the 2step. I also found I can leave at a lower rpm and let the n2o do the work.
