LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Nitrous Oxide
Question on the Lingenfelter LNC2000

Nitrous Oxide Installation | Tuning | Products

Sponsored by:

Question on the Lingenfelter LNC2000

Reply Subscribe

Search this Thread

Old

Jan 16, 2014 | 03:19 PM

#1

Thread Starter

Teching In

Joined: Apr 2010

Posts: 47

Likes: 0

Default

Question on the Lingenfelter LNC2000

I have a 69 nova with a stock 04 LS1/4L60E. Was searching some good info about nitrous and about this product(LNC2000) which seems great for what I was looking for. So the question is, Are the wires long enough to mount this controller inside the car ? The car ran 12.80 and was thinking of spraying a little....

Old

Jan 16, 2014 | 04:00 PM

#2

Teching In

Joined: May 2013

Posts: 21

Likes: 0

Default

Quote:

Originally Posted by 69bigblock

I have a 69 nova with a stock 04 LS1/4L60E. Was searching some good info about nitrous and about this product(LNC2000) which seems great for what I was looking for. So the question is, Are the wires long enough to mount this controller inside the car ? The car ran 12.80 and was thinking of spraying a little....

Maybe. I can measure the harnesses on mine. I think the 2 coil pack harnesses are 4' long. The control wires are maybe 12" out of the LNC box, then they terminate in plugs that you can attach longer wires to, which it comes with. I put my box on the driver's side inner fender and I was able to wrap the passenger side coil harness around the back of the motor and run up the fuel rail.

Another thing to consider is that the coil pack harnesses have 1/2" plastic loom covering them. Might be a PITA to punch holes in the firewall for that.

Old

Jan 16, 2014 | 06:44 PM

#3

Thread Starter

Teching In

Joined: Apr 2010

Posts: 47

Likes: 0

Default

I'm not to worried about drilling a hole. Can't be as big for the computer harness. Thanks

Old

Jan 17, 2014 | 01:54 AM

#4

12 Second Club

Joined: Jun 2012

Posts: 1,548

Likes: 1

Default

i believe the coil wire connections are long enough, at least to get in to the glove box, on a nova.

Old

Jan 17, 2014 | 08:32 AM

#5

9 Second Club

iTrader: (14)

Joined: Sep 2011

Posts: 405

Likes: 2

From: AZ

Default

Yes, the coil wire harness is 4 ft long from box to connector.

Old

Feb 20, 2014 | 02:30 PM

#6

Launching!

iTrader: (7)

Joined: Sep 2013

Posts: 230

Likes: 0

Default

Are you going to be running a window switch with the lnc 2000?

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 07:58 AM.