best way to check solenoid operation?
#1
best way to check solenoid operation?
Guys,
I have a NXL kit with FPSS, WOT switch, window switch, etc. All the safety goodies. What is the best way to check and make sure the solenoids are operating properly? I guess I could jumper the relay and see if they click, or I could activate the system with the bottle closed to check the fuel noids. But whats the right way to do this?
Thanks
Chris
I have a NXL kit with FPSS, WOT switch, window switch, etc. All the safety goodies. What is the best way to check and make sure the solenoids are operating properly? I guess I could jumper the relay and see if they click, or I could activate the system with the bottle closed to check the fuel noids. But whats the right way to do this?
Thanks
Chris
#2
Keep your bottle closed and car off. Then if you can jump them, you will hear them click without dumping fuel or N20 into your intake and motor.
Me, I power it all up and leave the nozzle out and wait for a freind to walk by so can blast em, just kidding!
Me, I power it all up and leave the nozzle out and wait for a freind to walk by so can blast em, just kidding!