i got the single nozzle NX kit for my Z. my questions..
1. the WOT switch that looks like a computer chip with a long arm hanging off one said...where does this go/how do i install it?
2. until my window switch gets here..can you just flip the activation switch off right before the car is supposed to shift then turn it back on after it has shifted? that might be a dumb question but i have an auto and dont want it spraying thru my shifts at all.
3. also any pics at all of an NX install would be greatly appreciate just so i can kinda compare how i ran my lines to what everyone else did. i ran the line under the car from the spare tire area...but im kinda scared of it being near the exhaust manifold..can something go wrong there?

sorry if all that was confusing. i just want to make sure everything is right before i go spraying the car

 

Here you go

 

awesome man..that was my main concern really. do you have your main line running up that same side of the car? how close to your manifold is it? also you have any full engine bay pics so i can see your install

 

I ran my lines inside the car

 

did u hook up the fuel rail to the fuel siloniod instead of the line to the siloniod

 

Yes I mounted it on the rail.

 

have u thought about hiding the kit. just incase u get pulled over. Has any one hidden this kit?

 

If I used a dry shot, I could mount a nozzle just before the Intercoolers.
But the NX MAF kit looks nice.

 

looks clean...i ran mine under the car..i probably should have done it through the car instead. ..all of mine looks exactly like that though except i got some extra line from the fuel solenoid to the fuel rail. i never thought about putting the solenoid on the rail like you did.