I'm installing my HSW interface and need a little help with the instructions.

HSW says to, " Connect the BLUE wire to the triggering device. This could be a RPM Window Switch, TPS/WOT Switch or Push Button (it is not suggested to hook up to an arming switch.)

I have the Tick Performance window switch and I'm not exactly sure what to connect the blue wire to. I narrowed it down to 3 possible connections of the window switch:

- Blue (which is connected to the TPS or WOT switch)
- Green (which is connected to the RPM or Tach wire)
- White ( which is connected to the arm switch)

I'm guessing I should be connecting blue to blue but I'd like to be 100% sure.

Thanks in advance!

 

Blue makes sense because that is what activates the nitrous.

 

Needs to be connected to blue, or the WOT wire. The RPM window switch works off of the ground wire on the relay.

-Garrett

 

Thanks guys! I will connect blue to blue.